Description
GNAT – 2 SLIDE INCUBATOR
KEY FEATURES
2 Dipslide Capacity.
Compact design.
Just plug in and go.
35 °C Pre-set temperature.
Achieves temperature in 30 mins.
Suitable for L8 applications.
High Temperature Protection.
240 V power supply.
Optional 12 V power lead available giving versatility in mobile testing.
The Gnat Incubator has the capacity to incubate two dipslides at a preset temperature of 35 °C. The two heated dipslide cells will hold standard MicroSlide Dipslides or non-screw top dipslides.
This compact 2 dipslide Incubator has been designed with industry standard heating technology to meet the incubation required for L8 legionella control monitoring. It is specifically intended for those treatment engineers who have a routine requirement to monitor a single cooling tower.
There is no confusing set up as the incubator is factory set to 35 °C, just plug it in and switch it on. It will be at 35 °C in 30 minutes.
Running on the supplied 220 / 240 V mains power lead or an optional 12 V power lead for use in a standard car lighter socket, it is protected by an internal fuse and has an over-temp protection for safe extended use.
All equiped with electronic control rather than the crude mechanical thermostats so accuracy and reliability are much higher. It is built to a very robust standard so designed to offer many years of service.
Another major point is safety – it runs on 12v DC supplied via the transformer plug so no mains voltage is present in the actual Incubator body – very important if the unit is to be used in a potentially dangerous field or industrial environment. It is also delivered with world universal plug combinations as standard.
The Gnat Dipslide Incubator is the easiest to operate. Just plug it in and within 30 minutes, it will heat up to the pre-set temperature and incubate until you turn it off. There are no additional buttons or switches to mess with. An internal fuse and over-temperature protection are built-in to provide safe and reliable, long-term operation.
The Worldwide universal power supply is adapted to standard U.S. and E.U. electrical mains (runs from a regular 220-240v mains supply), and it is also adapted to 12V DC Power sources, such as in an automobile or via battery.
12V vehicle cable sold separately.
Simplicity of operation, maintenance free, 30 minute minute warm up period, the incubation of your dipslides couldn’t be easier
Capacity: 2 Dipslides
Temperature Range: 35 °C
Warm up time: 30 minutes
Power Supply: 12 V / 220 V - 240 V
Dimensions: 150 x 95 x 83 mm
Weight: 480 g
Related products
| DS0010 | Aerobic bacteria and yeast/fungi slides | 34.95 € |  |
| DS0015 | Sulphate reducing bacteria slides | 37.95 € | |
Linked activities to this product :
Cooling Water - Dishwasher Water - Drinking Water
Tested parameters :
Type of product :
Microbiology - Mini microbiological Incubators for field use
